NSN 5365-00-001-2308

Part Details | SHIM

5365-00-001-2308 A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.

Alternate Parts: 29466521, 29-46652-1, 5365-00-001-2308, 00-001-2308, 5365000012308, 000012308

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53SEP 24, 197200-001-230820349 ( SHIM )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5365-00-001-2308
Part Number Cage Code Manufacturer
29-46652-181205THE BOEING COMPANYDBA BOEING
Technical Data | NSN 5365-00-001-2308
Characteristic Specifications
MATERIAL STEEL COMP 302
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE
CONSTRUCTION LAMINATED
LAMINATION QUANTITY11
LAMINATION THICKNESS0.003 INCHES NOMINAL
SPECIAL FEATURESHALF CIRCLE,3.280 IN. RADIUS TO INNER EDGE,3.870 IN. RADIUS TO OUTER EDGE