Part Details | SHIP PROPULSION SHAFT
2010-00-573-8053 A shaft used to transmit to the propeller the torque generated by the main engine of a ship and also to transfer the propeller thrust to the thrust block.
Alternate Parts: 2010DA0101004, 2010DA0-101004, LD203001PC30004, 2010-00-573-8053, 00-573-8053, 2010005738053, 005738053
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 20 | DEC 08, 1974 | 00-573-8053 | 03044 ( SHAFT, PROPULSION, SHIP ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2010-00-573-8053
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2010DA0-101004 | 34293 | HUNTINGTON INGALLS INCORPORATEDDIV INGALLS SHIPBUILDING |
| LD203001PC30004 | 34293 | HUNTINGTON INGALLS INCORPORATEDDIV INGALLS SHIPBUILDING |
Technical Data | NSN 2010-00-573-8053
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 30.088 FEET NOMINAL |
| UNIT TYPE | LINE SHAFT SECTION |
| FORWARD END KEYWAY | NOT PROVIDED |
| CONSTRUCTION | P ANY ACCEPTABLE |
| OUTSIDE DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| AFTER END KEYWAY | NOT PROVIDED |
| THREADED FORWARD END | NOT INCLUDED |
| USAGE LOCATION | PORT |
| THREADED AFTER END | NOT INCLUDED |
| INSIDE DIAMETER | 13.380 INCHES MINIMUM AND 13.560 INCHES MAXIMUM |
| FORWARD END COUPLING DESIGN | INTEGRAL |
| FORWARD END COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| FORWARD END COUPLING LENGTH | 0.442 FEET NOMINAL |
| FORWARD END COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| FORWARD END DESIGN | STRAIGHT |
| FORWARD END DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| AFTER END COUPLING DESIGN | INTEGRAL |
| COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| COUPLING LENGTH | 0.354 FEET NOMINAL |
| COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| AFTER END DESIGN | STRAIGHT |
| DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| SURFACE FINISH | F$DFJ$DFK |
| FORWARD BEARING SLEEVE OUTSIDE DIAMETER | 20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| FORWARD BEARING SLEEVE LENGTH | 2.250 FEET NOMINAL |
| AFTER BEARING SLEEVE OUTSIDE DIAMETER | 20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| AFTER BEARING SLEEVE LENGTH | 1.000 FEET NOMINAL |
| PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |
| COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |