Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-626-6597 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 809H89, 809H89, 905591, 905591, 6266597, 2520-00-626-6597, 00-626-6597, 2520006266597, 006266597
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1963 | 00-626-6597 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-626-6597
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 809H89 | 12603 | CLARK EQUIPMENT CO |
| 809H89 | 89749 | CLARK MATERIAL HANDLING COMPANY |
| 905591 | 58275 | SASCO INC CANADIAN DIV |
| 905591 | 22852 | SPALLA INC |
| 6266597 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2520-00-626-6597
| Characteristic | Specifications |
|---|---|
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633, FS1045-CANCELED FED SPEC 2ND MATERIAL RESPONSE |
| METALLIC HARDNESS RATING | 25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 0.812 INCHES NOMINAL |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.438 INCHES NOMINAL |
| FLANGE OUTSIDE DIAMETER | 4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE AND 6 UNTHREADED HOLE |
| THREAD SIZE | 3/8-16 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| THREAD DIRECTION | RIGHT-HAND |
| HOLE DIAMETER | 0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END SPLINE QUANTITY | 10 |
| SECOND END SPLINE LENGTH | 1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM |
| SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | LOCKING DEVICE GROOVE |
| SECOND END FACILITY WIDTH | 0.250 INCHES NOMINAL |
| SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| SECOND END BEARING SEAT | NOT INCLUDED |
| SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |