Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-654-3427 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 805336, 18731, 2520-00-654-3427, 00-654-3427, 2520006543427, 006543427
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1963 | 00-654-3427 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-654-3427
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 805336 | 34623 | AM GENERAL LLC |
| 18731 | 72447 | DANA COMMERCIAL VEHICLEMANUFACTURING, LLC |
Technical Data | NSN 2520-00-654-3427
| Characteristic | Specifications |
|---|---|
| METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 30.688 INCHES NOMINAL |
| FIRST END TYPE | TAPERED |
| FIRST END TAPER MAJOR DIAMETER | 1.625 INCHES NOMINAL |
| FIRST END TAPER | E1.000 INCHES NOMINAL |
| FIRST END KEYWAY WIDTH | 0.438 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.137 INCHES NOMINAL |
| FIRST END THREAD SIZE | 1-14 |
| FIRST END THREAD SERIES | UNF |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END SPLINE QUANTITY | 20 |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SECOND END PITCH DIAMETER | 0.500 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| SECOND END BEARING SEAT | NOT INCLUDED |
| END HOLE TYPE | DRILLED |
| HOLE QUANTITY | 1 |
| DRILLED HOLE DIAMETER | 0.172 INCHES NOMINAL |
| SPECIAL FEATURES | CIRCULAR TOOTH THICKNESS 0.0972 ON 1.250 PITCH DIA ALLOWABLE BACKLASH OF SPLINE TOOTH WITH MATING PART 0.0001 TO 0.004 |
| FSC APPLICATION DATA | TRAILER AIR CONDITIONER,TYPE MA-8 |