Part Details | AUTOMOTIVE AXLE SHAFT
2520-00-737-4986 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 640969, 18023, 18023, DSG1138, DSG-1138, 7374986, 2520-00-737-4986, 00-737-4986, 2520007374986, 007374986
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | JAN 01, 1963 | 00-737-4986 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-00-737-4986
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 640969 | 34623 | AM GENERAL LLC |
| 18023 | 72447 | DANA COMMERCIAL VEHICLEMANUFACTURING, LLC |
| 18023 | 95019 | DANA CORPSPICER TRANSMISSION DIV |
| DSG-1138 | 01227 | NAPCO INTL INC |
| 7374986 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2520-00-737-4986
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL COMP 1033 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1033 ASSN STD SINGLE MATERIAL RESPONSE |
| METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 21.428 INCHES MINIMUM AND 21.478 INCHES MAXIMUM |
| FIRST END TYPE | TAPERED |
| FIRST END TAPER MAJOR DIAMETER | 1.377 INCHES NOMINAL |
| FIRST END TAPER | E1.000 INCHES NOMINAL |
| FIRST END KEYWAY WIDTH | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| FIRST END KEYWAY DEPTH | 0.127 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| FIRST END THREAD SIZE | 1-14 |
| FIRST END THREAD SERIES | UNF |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END SPLINE QUANTITY | 10 |
| SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.222 INCHES MINIMUM AND 1.227 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.039 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |