Part Details | AUTOMOTIVE AXLE SHAFT
2520-01-041-0277 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 597201, 597-201, 2520-01-041-0277, 01-041-0277, 2520010410277, 010410277
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | MAY 19, 1977 | 01-041-0277 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-01-041-0277
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 597-201 | 96606 | AMERICAN COLEMAN COMPANY THEDBA METRO CROWN INTERNATIONAL |
Technical Data | NSN 2520-01-041-0277
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| METALLIC HARDNESS RATING | 55.0 MAXIMUM ROCKWELL C |
| OVERALL LENGTH | 36.565 INCHES NOMINAL |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 0.617 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.437 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE |
| TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |
| FLANGE HOLE TAPER | E4.249 INCHES NOMINAL |
| FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| FIRST END FACILITY WIDTH | 0.880 INCHES NOMINAL |
| FIRST END FACILITY DIAMETER | 1.874 INCHES MINIMUM AND 1.876 INCHES MAXIMUM |
| FIRST END FACILITY LOCATION | 16.750 IN. FROM FLANGE FACE |
| FIRST END BEARING SEAT | NOT INCLUDED |
| SECOND END TYPE | SPLINED |
| SECOND END SPLINE TYPE | STRAIGHT |
| SECOND END SPLINE QUANTITY | 16 |
| SECOND END SPLINE LENGTH | 2.250 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.745 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM |
| SECOND END BEARING SEAT | NOT INCLUDED |