Part Details | AUTOMOTIVE AXLE SHAFT
2520-01-474-3901 A shaft which is a component of AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, used to transmit rotary motion from the differential assembly either directly or indirectly to the wheel hubs. Excludes shafts with a universal joint or a component of a universal joint attached to it.
Alternate Parts: 124603695, 12460369-5, EX48552, EX4855-2, 2990070, 299-0070, 10068552, EX48552, EX4855-2, 2520PL0839479, 456720023102, EX48552, EX4855-2, EX4855, 2520-01-474-3901, 01-474-3901, 2520014743901, 014743901
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 25 | MAY 03, 2000 | 01-474-3901 | 10852 ( SHAFT, AXLE, AUTOMOTIVE ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2520-01-474-3901
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12460369-5 | 34623 | AM GENERAL LLC |
| EX4855-2 | 34623 | AM GENERAL LLC |
| 299-0070 | 62826 | GKN DRIVELINE NORTH AMERICA INC. |
| 10068552 | 62826 | GKN DRIVELINE NORTH AMERICA INC. |
| EX4855-2 | 62826 | GKN DRIVELINE NORTH AMERICA INC. |
| 2520PL0839479 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH |
| 456720023102 | 0000V | NCB HUNGARY HONVEDSEGI EGYSEGESTERMEKKOD |
| EX4855-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
| EX4855 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2520-01-474-3901
| Characteristic | Specifications |
|---|---|
| OVERALL LENGTH | 29.770 INCHES MINIMUM AND 30.240 INCHES MAXIMUM |
| FIRST END TYPE | FLANGED |
| FLANGE OVERALL THICKNESS | 0.303 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| FLANGE THICKNESS AT MOUNTING HOLE | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| FLANGE OUTSIDE DIAMETER | 2.948 INCHES MINIMUM AND 2.952 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE |
| HOLE DIAMETER | 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| SECOND END TYPE | SPLINED |
| SECOND END GEAR TEETH QUANTITY | 32 |
| SECOND END GEAR TEETH PRESSURE ANGLE IN DEG | 45.0 |
| SECOND END GEAR OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| SECOND END SPLINE TYPE | INVOLUTE |
| SECOND END SPLINE PRESSURE ANGLE IN DEG | 45.0 |
| SECOND END PITCH DIAMETER | 0.071 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 3.210 INCHES MINIMUM AND 3.250 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.375 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.282 INCHES NOMINAL |
| SPECIAL FEATURES | ITEM FOR RIGHT HAND ONLY; SURFACE HARDNESS ROCKWELL C 58-63 - CORE HARDNESS ROCKWELL C 35 MAX; MAT'L FOR BOOT CLAMP - STAINLESS STEEL, TYPE 304 IAW ASTM A167 |
| END ITEM IDENTIFICATION | NSN 2320-01-412-0143 TRUCK, UTILITY - HUM-V |