Part Details | ENGINE ACCESSORY GENERATOR
2920-00-441-0526 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 4770847, 47619127, 4761912-7, 2920-00-441-0526, 00-441-0526, 2920004410526, 004410526
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 12, 1968 | 00-441-0526 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-441-0526
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4770847 | 0AHU0 | KALMAR AC INC |
| 4761912-7 | 0AHU0 | KALMAR AC INC |
Technical Data | NSN 2920-00-441-0526
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.062 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.127 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 10.310 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.316 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 196.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.099 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 0.310 INCHES NOMINAL |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 1.150 INCHES NOMINAL |
| THREAD SERIES | UNS |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |