Part Details | ENGINE ACCESSORY GENERATOR
2920-00-460-5494 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1117229, 1117243, 1117229, 1117243, 2920-00-460-5494, 00-460-5494, 2920004605494, 004605494
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | FEB 23, 1972 | 00-460-5494 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED
Cross Reference | NSN 2920-00-460-5494
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1117229 | 24617 | GENERAL MOTORS CORP |
| 1117243 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1117229 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1117243 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-460-5494
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 24.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 35.0 |
| RECTIFIER LOCATION | SEPARATE |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.590 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.900 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 3.975 INCHES NOMINAL |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.195 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.518 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNS |
| MOUNTING HOLE THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 14-1/2 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED |
| SECOND STEP DIAMETER | 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |