Part Details | ENGINE ACCESSORY GENERATOR
2920-00-573-0455 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 1101408, 1101408, 1101408, 2920-00-573-0455, 00-573-0455, 2920005730455, 005730455
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1963 | 00-573-0455 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
SQUARE FLANGE W/FOUR MTG HOLES
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-573-0455
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1101408 | 61928 | GENERAL MOTORS CORPAC-DELCO DIV |
| 1101408 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1101408 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-573-0455
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 6.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 16.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 2000 |
| RECTIFIER LOCATION | INTEGRAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 1 SQUARE FLANGE W/FOUR MTG HOLES |
| PILOT DIAMETER | 2.995 INCHES MINIMUM AND 2.999 INCHES MAXIMUM |
| PILOT HEIGHT | 0.375 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 2.750 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 2.750 INCHES NOMINAL |
| TOP MOUNTING HOLE DIAMETER | 0.531 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.531 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.375 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.749 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 1.062 INCHES NOMINAL |
| KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.906 INCHES NOMINAL |
| THREAD SERIES | UNF |
| THREAD DIAMETER | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| FURNISHED ITEMS | NUT AND VOLTAGE REGULATOR AND WOODRUFF KEY |