Part Details | ENGINE ACCESSORY GENERATOR
2920-00-830-6660 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: 2920008306660, G226F, G22-6F, G226F, G22-6F, 10889713, 2920-00-830-6660, 00-830-6660, 2920008306660, 008306660
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | JAN 01, 1962 | 00-830-6660 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
SPLINED SHAFT END
Cross Reference | NSN 2920-00-830-6660
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2920008306660 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| G22-6F | 31435 | LUCAS AEROSPACE POWER EQUIPMENTCORPORATION |
| G22-6F | 3CPE0 | SAFRAN POWER USA, LLC |
| 10889713 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 2920-00-830-6660
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 28.5 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 500.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 8000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1900 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1500 |
| RECTIFIER LOCATION | INTEGRAL |
| GROUNDING METHOD | INTERNAL |
| GROUND POLARITY TYPE | NEGATIVE |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | ROUND FLANGE WITH HOLES EQUALLY SPACED |
| MOUNTING HOLE DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING HOLE CIRCLE RADIUS | 1.520 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 12 |
| SHAFT DRIVE END STYLE | SPLINED SHAFT END |
| SPLINE MINOR DIAMETER | 0.809 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.862 INCHES MINIMUM AND 0.867 INCHES MAXIMUM |
| SPLINE WIDTH | 0.073 INCHES NOMINAL |
| SPLINE LENGTH | 0.750 INCHES NOMINAL |
| SPLINE QUANTITY | 16 |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | DUSTPROOF |