Part Details | ELECTRICAL ENGINE STARTER RELAY-SOLENOID
2920-00-923-2529 An item having a moving plunger type core which travels parallel to the longitudinal axis of the coil(s), and which is primarily designed to perform the dual function of closing the circuit of a STARTER, ENGINE, ELECTRICAL and actuating the starter engaging mechanism. It must have provisions for attaching the mechanical linkage for actuating the engaging mechanism if the linkage is not included. May have provisions for manual actuation. Without contacts this item is known as a SOLENOID, ELECTRICAL. Without provisions for attaching mechanical linkage this item is known as a RELAY, ELECTROMAGNETIC. See also SWITCH, ENGINE STARTER, ELECTRICAL.
Alternate Parts: 1119896, 1119896, 1119896, 1119896, 2920-00-923-2529, 00-923-2529, 2920009232529, 009232529
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | FEB 04, 1966 | 00-923-2529 | 17084 ( RELAY-SOLENOID, ENGINE STARTER, ELECTRICAL ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 2920-00-923-2529
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1119896 | 24617 | GENERAL MOTORS CORP |
| 1119896 | 61928 | GENERAL MOTORS CORPAC-DELCO DIV |
| 1119896 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1119896 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-923-2529
| Characteristic | Specifications |
|---|---|
| NOMINAL VOLTAGE RATING | 20.0 VOLTS |
| CLOSING VOLTAGE RATING | 20.0 VOLTS NOMINAL |
| PULL-IN CURRENT | 35.0 AMPERES MINIMUM AND 39.0 AMPERES MAXIMUM |
| HOLD-IN CURRENT | 6.750 AMPERES MAXIMUM |
| ENGAGING LINKAGE | NOT INCLUDED |
| CONTACT MANUAL CLOSING PROVISION | NOT INCLUDED |
| CONTROL TERMINAL QUANTITY | 1 |
| CONTROL TERMINAL TYPE | STUD |
| GROUNDED CONTROL TERMINAL | NOT INCLUDED |
| MAIN TERMINAL QUANTITY | 2 |
| MAIN TERMINAL TYPE | STUD |
| CONTROL TERMINAL QUANTITY INTERNALLY CONNECTED TO MAIN TERMINAL | 1 |
| MOTOR DIAMETER FOR WHICH RIGID MOUNT IS DESIGNED | 5.062 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 HOLE AND 2 SLOT |
| MOUNTING HOLE DIAMETER | 0.315 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| MOUNTING SLOT LENGTH | 0.315 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| MOUNTING SLOT WIDTH | 0.255 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| MOUNTING FACILITY SPACING | HOLES AND SLOTS 66 DEG C TO C ON 2.520 IN. MIN 2.540 IN. MAX RADIUS |
| SURFACE TREATMENT | ZINC |
| SUBMERSIBILITY | NONSUBMERSIBLE |