Part Details | ENGINE ACCESSORY GENERATOR
2920-01-118-9374 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: TY6607, AT56248, TY6607, SE501354, 8TA2024DS, 10220, 10-220, 2920-01-118-9374, 01-118-9374, 2920011189374, 011189374
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | SEP 14, 1981 | 01-118-9374 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-01-118-9374
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| TY6607 | 75160 | DEERE & CO |
| AT56248 | 75160 | DEERE & CO |
| TY6607 | 75755 | DEERE & COMPANYDBA JOHN DEERE |
| SE501354 | 75755 | DEERE & COMPANYDBA JOHN DEERE |
| 8TA2024DS | 31211 | MOTOROLA AUTOMOTIVE ELECTRONICS |
| 10-220 | 31211 | MOTOROLA AUTOMOTIVE ELECTRONICS |
Technical Data | NSN 2920-01-118-9374
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| MAXIMUM OUTPUT CURRENT RATING IN AMPS | 22.0 |
| MAXIMUM RATED ARMATURE SPEED IN RPM | 10000 |
| ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 3500 |
| MINIMUM CURRENT CUT-IN SPEED IN RPM | 1100 |
| GROUNDING METHOD | EXTERNAL |
| GROUND POLARITY TYPE | NEGATIVE |
| SHAFT ROTATION DIRECTION | B$C |
| MOUNTING STYLE | 9 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.430 INCHES NOMINAL |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.320 INCHES NOMINAL |
| BOTTOM MOUNTING HOLE DIAMETER | 0.380 INCHES NOMINAL |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 0.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 180.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| SECOND STEP DIAMETER | 0.625 INCHES NOMINAL |
| THREAD SERIES | UNC |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 18 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| ENVIRONMENTAL PROTECTION | DUSTPROOF |
| FURNISHED ITEMS | FAN PULLEY |