Part Details | SHOULDERED SHAFT
3040-00-406-4844 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 604761, 60476-1, 60476, 604761, 60476-1, 3040-00-406-4844, 00-406-4844, 3040004064844, 004064844
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 15, 1970 | 00-406-4844 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-406-4844
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 60476-1 | 82340 | EDO LLC |
| 60476 | 82340 | EDO LLC |
| 60476-1 | 9Y580 | EDO LLCDBA SONAR & COMMAND SYSTEMS |
Technical Data | NSN 3040-00-406-4844
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND A MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.4530 INCHES MINIMUM AND 0.4580 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.380 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 FLAT KEYWAY |
| SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0320 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.2290 INCHES MINIMUM AND 0.2310 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.007 INCHES MINIMUM AND 0.009 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.2496 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| SECOND END SLOT DEPTH | 0.040 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.046 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.560 INCHES NOMINAL |
| OVERALL LENGTH | 1.560 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | SHAFT IS ECCENTRIC |