Part Details | SHOULDERED SHAFT
3040-00-410-2142 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 12007339, 1005004102142, 3040-00-410-2142, 00-410-2142, 3040004102142, 004102142
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 27, 1974 | 00-410-2142 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-00-410-2142
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 12007339 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
| 1005004102142 | A00AM | E.C.A ETABLISSEMENT CENTRALDESAPPROVISIONNEMENTS DES FORCES |
Technical Data | NSN 3040-00-410-2142
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-T-6736 MIL SPEC 2ND MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.9800 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 PLAIN |
| SECOND END DIAMETER | 1.0000 INCHES NOMINAL |
| SECOND END WIDTH ACROSS FLATS | 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.470 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| OVERALL LENGTH | 8.700 INCHES MINIMUM AND 8.750 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | 2 CROSS DRILLED HOLE ON THE SECOND END STYLE,0.144 IN. DIA,0.025IN. LG. THE DISTANCE FROM HOLE CENTER TO END |