Part Details | SHOULDERED SHAFT
3040-00-412-9246 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A667108, A667-108, 3040-00-412-9246, 00-412-9246, 3040004129246, 004129246
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | APR 29, 1970 | 00-412-9246 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-412-9246
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A667-108 | 53247 | PRODUCTS SUPPORT, INC. |
Technical Data | NSN 3040-00-412-9246
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 416 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.5615 INCHES MINIMUM AND 0.5620 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0390 INCHES MINIMUM AND 0.0420 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.4720 INCHES MINIMUM AND 0.4760 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.054 INCHES NOMINAL |
| SECOND END DIAMETER | 0.4999 INCHES MINIMUM AND 0.5002 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.932 INCHES MINIMUM AND 0.942 INCHES MAXIMUM |
| OVERALL LENGTH | 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | FOUR 4-40-NC-2 HOLES EQUALLY SPACED ON 0.781 IN. DIA MTG CTR THRU SIDE OF LARGEST STEP DIA |
| SUPPLEMENTARY FEATURES | 0.25 IN. SQ HOLE THRU FIRST END 0.5 IN. DEEP; 0.375 IN. DIA HOLE THRU SECOND END 1 IN. DEEP |