Part Details | SHOULDERED SHAFT
3040-00-419-0440 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 341687, 3040-00-419-0440, 00-419-0440, 3040004190440, 004190440
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 28, 1972 | 00-419-0440 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-419-0440
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 341687 | 26581 | HAMILTON SUNDSTRAND CORPORATIONDBA APPLIED SCIENCE OPERATION |
Technical Data | NSN 3040-00-419-0440
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.0936 INCHES MINIMUM AND 0.0938 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0100 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.0838 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM |
| SECOND END DIAMETER | 0.1500 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.150 INCHES NOMINAL |
| OVERALL LENGTH | 0.375 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | 16 MICROINCH FINISH ON SECOND END GROOVE WIDTH |