Part Details | SHOULDERED SHAFT
3040-00-420-7052 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: A25A7060761, A25A706-076-1, 3040-00-420-7052, 00-420-7052, 3040004207052, 004207052
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 07, 1969 | 00-420-7052 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-420-7052
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| A25A706-076-1 | 99696 | LOCKHEED MARTIN CORPORATIONDIV LOCKHEED MARTIN SYSTEMS & GLOBAL |
Technical Data | NSN 3040-00-420-7052
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 COND.B MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.8750 INCHES NOMINAL |
| FIRST END SLOT DEPTH | 0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| FIRST END SLOT WIDTH | 0.115 INCHES MINIMUM AND 0.165 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 0 PLAIN |
| SECOND END DIAMETER | 0.5620 INCHES NOMINAL |
| SECOND END SLOT DEPTH | 0.218 INCHES NOMINAL |
| SECOND END SLOT WIDTH | 0.070 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 7.000 INCHES NOMINAL |
| OVERALL LENGTH | 7.250 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | PARTIAL BORE 1ST END 0.375IN. DIA,3.750IN. LG; 2IN. FROM 2ND END IS A HOLE 0.250IN. DIA,1.500IN. LG |