Part Details | SHOULDERED SHAFT
3040-00-433-6476 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 4400B1422, 4400B1422, 3040-00-433-6476, 00-433-6476, 3040004336476, 004336476
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | FEB 12, 1972 | 00-433-6476 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLATTED
PLAIN
FLATTED
Cross Reference | NSN 3040-00-433-6476
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4400B1422 | 94117 | BAE SYSTEMS INFORMATION ANDELECTRONIC SYSTEMS INTEGRATION INC. |
| 4400B1422 | 87557 | LOCKHEED CORPLOCKHEED ELECTRONICS CO INC |
Technical Data | NSN 3040-00-433-6476
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLATTED |
| MATERIAL | 3$DST0079 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END FLAT DEPTH | 0.0617 INCHES NOMINAL |
| FIRST END FLAT LENGTH | 0.375 INCHES NOMINAL |
| FIRST END DIAMETER | 0.2497 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 2.312 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.250 INCHES NOMINAL |
| OVERALL LENGTH | 5.250 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND END BORE 0.094 INCH DIAMETER,0.084 INCH DEEP,COUNTERBORE 0.152 INCH DIAMETER,0.188 INCH DEEP |