Part Details | SHOULDERED SHAFT
3040-00-435-5245 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0215170, 02-15170, 3040-00-435-5245, 00-435-5245, 3040004355245, 004355245
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAR 28, 1969 | 00-435-5245 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-435-5245
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 02-15170 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-435-5245
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.3124 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.750 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.2390 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.3124 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.2813 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 9 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.4062 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.850 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3023 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4062 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.3553 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 12 |
| LARGEST STEP DIAMETER | 0.512 INCHES NOMINAL |
| OVERALL LENGTH | 4.094 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| FSC APPLICATION DATA | PUMP FUEL AIRCRAFT |