Part Details | SHOULDERED SHAFT
3040-00-450-4806 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7776697001, 777-6697-001, 7776697, 777-6697, 3040-00-450-4806, 00-450-4806, 3040004504806, 004504806
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | DEC 12, 1969 | 00-450-4806 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
FLATTED
TAPERED WITH FLAT
FLATTED
Cross Reference | NSN 3040-00-450-4806
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 777-6697-001 | 13499 | ROCKWELL COLLINS, INC.DBA GOVERNMENT SYSTEMS |
| 777-6697 | 13499 | ROCKWELL COLLINS, INC.DBA GOVERNMENT SYSTEMS |
Technical Data | NSN 3040-00-450-4806
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A MIL SPEC ALL MATERIAL RESPONSES |
| FIRST END TAPER MAJOR DIAMETER | 0.3080 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| FIRST END TAPER LENGTH | 0.562 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | FLATTED |
| SECOND END FLAT DEPTH | 0.1000 INCHES NOMINAL |
| SECOND END FLAT LENGTH | 5.938 INCHES NOMINAL |
| SECOND END DIAMETER | 0.3080 INCHES MINIMUM AND 0.3100 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.308 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| OVERALL LENGTH | 6.500 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SUPPLEMENTARY FEATURES | SURFACE TREATMENT IS PASSIVATE,TYPE II PER QQ-P-35; SHAFT IS FLATTED ON TWO SIDES; LENGTH OF SECTION BETWEENGROOVES .154 IN. |