Part Details | SHOULDERED SHAFT
3040-00-505-7465 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 4836711, 483671-1, 4836711, 483671-1, 4836711, 483671-1, 483671, 3040-00-505-7465, 00-505-7465, 3040005057465, 005057465
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JUL 20, 1974 | 00-505-7465 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-505-7465
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 483671-1 | 54X10 | RAYTHEON COMPANYDBA RAYTHEON |
| 483671-1 | 49956 | RAYTHEON COMPANYDBA RAYTHEON |
| 483671-1 | 3B150 | RAYTHEON COMPANYDBA RAYTHEON |
| 483671 | 49956 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-00-505-7465
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 3 TAPERED WITH FLAT |
| MATERIAL | STEEL COMP 302 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.9850 INCHES MINIMUM AND 0.9900 INCHES MAXIMUM |
| FIRST END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 4.688 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 CIRCULAR GROOVED |
| SECOND END KEYWAY WIDTH | 0.1350 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 2.125 INCHES MINIMUM AND 2.156 INCHES MAXIMUM |
| SECOND END KEYWAY DEPTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 3.500 INCHES NOMINAL |
| SECOND END DIAMETER | 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.3750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.985 INCHES MINIMUM AND 0.990 INCHES MAXIMUM |
| OVERALL LENGTH | 10.370 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | TWO ADDITIONAL CROSS DRILLED THRU HOLES ON SECOND END,0.125/0.129 IN. DIA OF ONE HOLE,0.370/0.375 IN. DIA OF OTHER HOLE,0.370 IN. DISTANCE FROM BOTH HOLE CENTERS TO END,90 DEG ANGLE BTWN HOLES |