Part Details | SHOULDERED SHAFT
3040-00-509-9269 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 507758, 3040-00-509-9269, 00-509-9269, 3040005099269, 005099269
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-509-9269 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-509-9269
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 507758 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-509-9269
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | HS279 TYPE I MFR REF SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 20.0 MICROINCHES |
| FIRST END DIAMETER | 0.1854 INCHES MINIMUM AND 0.1864 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.440 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2230 INCHES MINIMUM AND 0.2250 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.2480 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| SECOND END HOLE DEPTH | 0.250 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 18 |
| LARGEST STEP DIAMETER | 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| OVERALL LENGTH | 4.040 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | 18 SPLINES ON BASIS OF 19 |