Part Details | SHOULDERED SHAFT
3040-00-529-8126 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: B5826, B5826, 3040-00-529-8126, 00-529-8126, 3040005298126, 005298126
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | SEP 07, 1974 | 00-529-8126 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-529-8126
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B5826 | 17472 | EATON CORPORATIONDIV FUEL & MOTION CONTROL SYSTEMS |
| B5826 | 72121 | EATON MOTOR SITE |
Technical Data | NSN 3040-00-529-8126
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 0.4000 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.3750 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 0.4375 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 11 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.4160 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.5900 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2910 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4160 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.3535 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 0.690 INCHES NOMINAL |
| OVERALL LENGTH | 2.020 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| FSC APPLICATION DATA | ACTAUTOR ELECTRO-MECH ACFT |