Part Details | SHOULDERED SHAFT
3040-00-554-8035 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 5548035, 3040-00-554-8035, 00-554-8035, 3040005548035, 005548035
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-554-8035 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLATTED
TONGUE
FLATTED
TONGUE
Cross Reference | NSN 3040-00-554-8035
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5548035 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 3040-00-554-8035
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLATTED |
| MATERIAL | STEEL COMP 4140 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 1.6250 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 1.000 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 0.625 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 5 TONGUE |
| SECOND END GROOVE WIDTH | 0.1250 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.0200 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 3.063 INCHES NOMINAL |
| SECOND END DIAMETER | 1.2800 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.1880 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.188 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 3.057 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN HOLES | 90.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 1.625 INCHES NOMINAL |
| OVERALL LENGTH | 58.375 INCHES NOMINAL |
| STEP QUANTITY | 9 |