Part Details | SHOULDERED SHAFT
3040-00-563-9463 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0E73, 5639463, 3040-00-563-9463, 00-563-9463, 3040005639463, 005639463
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-563-9463 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-563-9463
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 0E73 | 92392 | ALLIS-CHALMERS CORP |
| 5639463 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-563-9463
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AISI OR SAE 8650H ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 2.3580 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 3.875 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 2.0480 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.3580 INCHES NOMINAL |
| FIRST END SPLINE QUANTITY | 16 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 2.3580 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 3.750 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.0480 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.3580 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 1.1250 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 16 |
| LARGEST STEP DIAMETER | 2.495 INCHES NOMINAL |
| OVERALL LENGTH | 28.280 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| FSC APPLICATION DATA | DIFFERENTIAL FINAL DRIVE,TRACTOR FULL TRACKED HIGH SPEED |