Part Details | SHOULDERED SHAFT
3040-00-575-1386 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6814441, 6814441, 3040-00-575-1386, 00-575-1386, 3040005751386, 005751386
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-575-1386 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-575-1386
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6814441 | 73342 | ALLISON TRANSMISSION, INC. |
| 6814441 | 24617 | GENERAL MOTORS CORP |
Technical Data | NSN 3040-00-575-1386
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL CORROSION RESISTING |
| FIRST END SPLINE LENGTH | 1.000 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4380 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END SPLINE LENGTH | 0.780 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.4970 INCHES MINIMUM AND 0.4980 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.1010 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.411 INCHES NOMINAL |
| SECOND END HOLE DEPTH | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| OVERALL LENGTH | 10.500 INCHES NOMINAL |