Part Details | SHOULDERED SHAFT
3040-00-588-2870 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: GA6209, GA6209, 3040-00-588-2870, 00-588-2870, 3040005882870, 005882870
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1961 | 00-588-2870 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-588-2870
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| GA6209 | 59211 | PARKER-HANNIFIN CORPORATIONDBA CUSTOMER SUPPORT MILITARY |
| GA6209 | 86329 | PARKER-HANNIFIN CORPORATIONDBA GAS TURBINE FUEL SYSTEMS |
Technical Data | NSN 3040-00-588-2870
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8690 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.4905 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 14 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.4658 INCHES MINIMUM AND 0.4688 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.875 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.3669 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.4658 INCHES MINIMUM AND 0.4688 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.4375 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 14 |
| LARGEST STEP DIAMETER | 0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| OVERALL LENGTH | 3.000 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| FSC APPLICATION DATA | DRIVE AND SUMP ASSEMBLY,TRANSMISSION,HELICOPTER |