Part Details | SHOULDERED SHAFT
3040-00-613-2019 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7392863, 3040-00-613-2019, 00-613-2019, 3040006132019, 006132019
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-613-2019 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-613-2019
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7392863 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-613-2019
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 2 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 10.062 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 TAPERED WITH FLAT |
| SECOND END DIAMETER | 0.8690 INCHES MINIMUM AND 0.8700 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.375 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| OVERALL LENGTH | 11.375 INCHES NOMINAL |
| STEP QUANTITY | 1 |
| SPECIAL FEATURES | SECOND END HAS BEVELED EDGES,0.125 IN.WD AT 45 DEGREE ANGLE |