Part Details | SHOULDERED SHAFT
3040-00-628-7985 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 539898, 3040-00-628-7985, 00-628-7985, 3040006287985, 006287985
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-628-7985 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 3040-00-628-7985
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 539898 | 73030 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-628-7985
| Characteristic | Specifications |
|---|---|
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5610 ASSN STD SINGLE MATERIAL RESPONSE |
| FIRST END GROOVE WIDTH | 0.0900 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 0.2600 INCHES MINIMUM AND 0.2630 INCHES MAXIMUM |
| FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| FIRST END HOLE DIAMETER | 0.0650 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| FIRST END DISTANCE FROM HOLE CENTER TO END | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| FIRST END EXTERNAL THREAD LENGTH | 0.360 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 1.210 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END HOLE DIAMETER | 0.0650 INCHES MINIMUM AND 0.0720 INCHES MAXIMUM |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| SECOND END EXTERNAL THREAD LENGTH | 0.360 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.374 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| OVERALL LENGTH | 2.890 INCHES NOMINAL |
| STEP QUANTITY | 7 |