Part Details | SHOULDERED SHAFT
3040-00-629-4435 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6294435, 3040-00-629-4435, 00-629-4435, 3040006294435, 006294435
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-629-4435 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-629-4435
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6294435 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 3040-00-629-4435
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-00643,TYPE I,COMP FS 1015 TO FS 1025,CONDITION HR MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.4390 INCHES MINIMUM AND 0.4420 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.574 INCHES NOMINAL |
| SECOND END DIAMETER | 0.5901 INCHES MINIMUM AND 0.5904 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.911 INCHES MINIMUM AND 0.916 INCHES MAXIMUM |
| OVERALL LENGTH | 5.406 INCHES NOMINAL |
| STEP QUANTITY | 5 |
| SPECIAL FEATURES | 2-INDENTED FLAT KEYWAY; FIRST KEYWAY LOCATED ON FIRST END,0.750 IN.LG; SECOND KEYWAY LOCATED ON THIRD STEP,0.812 IN. LG,0.1855 IN. MIN.- 0.1875 IN. MAX. W |