Part Details | SHOULDERED SHAFT
3040-00-629-4436 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 6294436, 3040-00-629-4436, 00-629-4436, 3040006294436, 006294436
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-629-4436 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
TAPERED WITH FLAT
PLAIN
TAPERED WITH FLAT
Cross Reference | NSN 3040-00-629-4436
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 6294436 | 19204 | ARMY, UNITED STATES DEPARTMENT OFTHE |
Technical Data | NSN 3040-00-629-4436
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | 0$5 |
| MATERIAL DOCUMENT AND CLASSIFICATION | SPEC QQ-S-634 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 TAPERED WITH FLAT |
| SECOND END GROOVE WIDTH | 0.0440 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.7395 INCHES MINIMUM AND 0.7400 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.044 INCHES MINIMUM AND 0.046 INCHES MAXIMUM |
| SECOND END KEYWAY WIDTH | 0.1230 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.435 INCHES NOMINAL |
| SECOND END DIAMETER | 0.8800 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.880 INCHES NOMINAL |
| OVERALL LENGTH | 6.030 INCHES NOMINAL |
| STEP QUANTITY | 3 |