Part Details | SHOULDERED SHAFT
3040-00-633-7630 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 863781, 863781, 3040-00-633-7630, 00-633-7630, 3040006337630, 006337630
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-633-7630 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
INTERNAL THREADED
FLAT KEYWAY
INTERNAL THREADED
Cross Reference | NSN 3040-00-633-7630
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 863781 | 56232 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| 863781 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
Technical Data | NSN 3040-00-633-7630
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 FLAT KEYWAY |
| MATERIAL | ALUMINUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-268,COND T FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0625 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.4550 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.2500 INCHES NOMINAL |
| FIRST END DIAMETER | 0.5000 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.2500 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 INTERNAL THREADED |
| SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| SECOND END STEP LENGTH | 0.0625 INCHES NOMINAL |
| SECOND END ANGLE BETWEEN FLATS | 180.0 DEGREES NOMINAL |
| LARGEST STEP DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 1.606 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | SECOND END THD 5/8-24UNS-2A |