Part Details | SHOULDERED SHAFT
3040-00-646-9369 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 9084309, 3040-00-646-9369, 00-646-9369, 3040006469369, 006469369
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-646-9369 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-646-9369
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 9084309 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
Technical Data | NSN 3040-00-646-9369
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 304 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0300 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.4430 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.190 INCHES NOMINAL |
| FIRST END DIAMETER | 0.4720 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.594 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.2930 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.3700 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 0.3440 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.679 INCHES NOMINAL |
| OVERALL LENGTH | 7.000 INCHES NOMINAL |
| STEP QUANTITY | 2 |