Part Details | SHOULDERED SHAFT
3040-00-652-6702 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1807169, 3040-00-652-6702, 00-652-6702, 3040006526702, 006526702
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-652-6702 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-652-6702
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 1807169 | 10001 | NAVAIR AND NAVSEA MANAGEDORIGINAL DESIGN ACTIVITY DWG NOT |
Technical Data | NSN 3040-00-652-6702
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,COMP 864 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 8.0 MICROINCHES |
| FIRST END DIAMETER | 1.7358 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.562 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.5973 INCHES MINIMUM AND 1.6085 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 1.7358 INCHES MINIMUM AND 1.7408 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 27 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 2.9900 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 2.625 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.7040 INCHES MINIMUM AND 2.7210 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 2.9830 INCHES MINIMUM AND 2.9900 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 23 |
| LARGEST STEP DIAMETER | 2.557 INCHES MINIMUM AND 2.562 INCHES MAXIMUM |
| OVERALL LENGTH | 10.312 INCHES NOMINAL |
| STEP QUANTITY | 9 |