Part Details | SHOULDERED SHAFT
3040-00-686-1835 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: MAG257791, MAG25779-1, MAG25223, 3040-00-686-1835, 00-686-1835, 3040006861835, 006861835
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1961 | 00-686-1835 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-686-1835
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MAG25779-1 | 78567 | SPECO CORP |
| MAG25223 | 78567 | SPECO CORP |
Technical Data | NSN 3040-00-686-1835
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| FIRST END SPLINE LENGTH | 2.250 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.5210 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.5833 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END SPLINE LENGTH | 1.300 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.5210 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 0.5830 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.064 INCHES NOMINAL |
| OVERALL LENGTH | 8.880 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| FSC APPLICATION DATA | MISCELLANEOUS ACFT ACCESSORIES AND COMPONENTS |