Part Details | SHOULDERED SHAFT
3040-00-699-7993 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7709097, 3040-00-699-7993, 00-699-7993, 3040006997993, 006997993
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-699-7993 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TONGUE
TONGUE
Cross Reference | NSN 3040-00-699-7993
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7709097 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-699-7993
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 4 TONGUE |
| MATERIAL | STEEL COMP 8640 |
| FIRST END GROOVE WIDTH | 0.1300 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 2.8000 INCHES MINIMUM AND 2.8200 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 0.134 INCHES NOMINAL |
| FIRST END DIAMETER | 2.9600 INCHES MINIMUM |
| FIRST END SPLINE MINOR DIAMETER | 2.8450 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.9800 INCHES MINIMUM AND 2.9850 INCHES MAXIMUM |
| FIRST END INTERNAL THREAD LENGTH | 1.500 INCHES MINIMUM |
| FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 1.454 INCHES MINIMUM AND 1.458 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 47 |
| END SIMILARITY | IDENTICAL |
| SECOND END GROOVE WIDTH | 0.1300 INCHES MINIMUM AND 0.1500 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 2.8000 INCHES MINIMUM AND 2.8200 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.134 INCHES NOMINAL |
| SECOND END DIAMETER | 2.9900 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 2.8450 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 3.0020 INCHES MINIMUM AND 3.0025 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 1.500 INCHES MINIMUM |
| SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 1.454 INCHES MINIMUM AND 1.458 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 47 |
| LARGEST STEP DIAMETER | 3.1138 INCHES MINIMUM AND 3.1250 INCHES MAXIMUM |
| OVERALL LENGTH | 22.100 INCHES MAXIMUM |
| STEP QUANTITY | 4 |