Part Details | SHOULDERED SHAFT
3040-00-701-5485 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 7015485, 3040-00-701-5485, 00-701-5485, 3040007015485, 007015485
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-701-5485 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
SPLINED (STRAIGHT)
PLAIN
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-701-5485
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 7015485 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-701-5485
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66B,AISI C1040 TO C1045 OR 1137 TO 1141 OR SAE 1040 TO 1045 OR 1137 TO 1141 FED STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END DIAMETER | 0.7470 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 6 SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.9880 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 1.125 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.8100 INCHES MINIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.9970 INCHES MAXIMUM |
| SECOND END HOLE DIAMETER | 0.1000 INCHES NOMINAL |
| SECOND END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 6 |
| LARGEST STEP DIAMETER | 1.062 INCHES NOMINAL |
| OVERALL LENGTH | 7.438 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| FSC APPLICATION DATA | STEERING CLUTCH CONTROL,COMBAT TANK |