Part Details | SHOULDERED SHAFT
3040-00-735-4211 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 8351406, 3040007354211, 8351406, 3040-00-735-4211, 00-735-4211, 3040007354211, 007354211
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-735-4211 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-735-4211
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 8351406 | 73342 | ALLISON TRANSMISSION, INC. |
| 3040007354211 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 8351406 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-735-4211
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL COMP 4340 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC ALL MATERIAL RESPONSES |
| FIRST END DIAMETER | 1.5600 INCHES NOMINAL |
| FIRST END SPLINE LENGTH | 1.560 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 1.6800 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 1.6250 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 26 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.6790 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 6.760 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.6800 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 1.6250 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 26 |
| LARGEST STEP DIAMETER | 2.430 INCHES NOMINAL |
| OVERALL LENGTH | 23.720 INCHES NOMINAL |
| STEP QUANTITY | 21 |