Part Details | SHOULDERED SHAFT
3040-00-735-9092 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2520007359092, 7710088, 3040-00-735-9092, 00-735-9092, 3040007359092, 007359092
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-735-9092 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-735-9092
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2520007359092 | SCY13 | E.C.A ETABLISSEMENTCENTRALD'APPROVISIONNEMENT DES |
| 7710088 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-735-9092
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 8 PLAIN |
| MATERIAL | STEEL |
| FIRST END DISTANCE FROM END TO FLAT | 1.340 INCHES MINIMUM AND 1.380 INCHES MAXIMUM |
| FIRST END DIAMETER | 1.7500 INCHES MINIMUM AND 1.7505 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.984 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.9290 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 2.1000 INCHES NOMINAL |
| FIRST END PITCH DIAMETER | 1.8750 INCHES NOMINAL |
| FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END SPLINE QUANTITY | 30 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.1875 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 0.800 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 2.0540 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 2.1256 INCHES NOMINAL |
| SECOND END PITCH DIAMETER | 2.0000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 32 |
| LARGEST STEP DIAMETER | 2.875 INCHES NOMINAL |
| OVERALL LENGTH | 7.160 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| FSC APPLICATION DATA | BRAKE APPLY,POWER TRANSMISSION VEHICULAR |