Part Details | SHOULDERED SHAFT
3040-00-740-1002 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 547A003045, 003045, PL547600PC20, PL547-600PC20, C547600PC20, C547-600PC20, A547604, A547-604, 547A003045, 3040-00-740-1002, 00-740-1002, 3040007401002, 007401002
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-740-1002 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-740-1002
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 547A003045 | 34228 | L3 TECHNOLOGIES, INC.DBA L3 KEO |
| 003045 | 34228 | L3 TECHNOLOGIES, INC.DBA L3 KEO |
| PL547-600PC20 | 34228 | L3 TECHNOLOGIES, INC.DBA L3 KEO |
| C547-600PC20 | 34228 | L3 TECHNOLOGIES, INC.DBA L3 KEO |
| A547-604 | 34228 | L3 TECHNOLOGIES, INC.DBA L3 KEO |
| 547A003045 | 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NAVIGATION AND MARITIME SYSTEMS |
Technical Data | NSN 3040-00-740-1002
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A582,CL 303 OR 303SE ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END DIAMETER | 0.3125 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 PLAIN |
| SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| SECOND END EXTERNAL THREAD LENGTH | 0.3130 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.487 INCHES MINIMUM AND 0.489 INCHES MAXIMUM |
| OVERALL LENGTH | 2.906 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | 1ST END HAS THDS 0.281 IN.FROM END,3/8-16UNC-3A LEFT HAND THD;2ND END HAS SLOT,0.062 IN.W BY 0.062 IN.DP |