Part Details | SHOULDERED SHAFT
3040-00-741-4263 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: KC2780, M307538, 112026R1, 7414263, L23100, 3040-00-741-4263, 00-741-4263, 3040007414263, 007414263
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-741-4263 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
CIRCULAR GROOVED
SPLINED (STRAIGHT)
CIRCULAR GROOVED
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-741-4263
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| KC2780 | 56442 | DIAMOND REO TRUCK CO |
| M307538 | 61465 | GARWOOD/FELLER INCGARWOOD WINCH DIV |
| 112026R1 | 22852 | SPALLA INC |
| 7414263 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
| L23100 | 61038 | VICKERS INC |
Technical Data | NSN 3040-00-741-4263
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE 8620H OR 8720H SPECIAL QUALITY ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0156 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 1.5469 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.859 INCHES NOMINAL |
| FIRST END DIAMETER | 1.5750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 4 SPLINED (STRAIGHT) |
| SECOND END GROOVE WIDTH | 0.0156 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 1.5469 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 2.641 INCHES NOMINAL |
| SECOND END DIAMETER | 1.5750 INCHES NOMINAL |
| SECOND END SPLINE LENGTH | 1.813 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.3190 INCHES NOMINAL |
| SECOND END SPLINE MAJOR DIAMETER | 1.5750 INCHES NOMINAL |
| SECOND END INTERNAL THREAD LENGTH | 1.188 INCHES NOMINAL |
| SECOND END SPLINE QUANTITY | 10 |
| LARGEST STEP DIAMETER | 1.615 INCHES NOMINAL |
| OVERALL LENGTH | 8.000 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | CENTER STEP HAS INVOLUTE SPLINES 4.485 IN. LG,30 DEG PRESSURE ANGLE,1.750 IN. PITCH DIA |