Part Details | SHOULDERED SHAFT
3040-00-755-4898 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 11014618, 11014618, 3040-00-755-4898, 00-755-4898, 3040007554898, 007554898
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1960 | 00-755-4898 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-755-4898
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 11014618 | 19205 | SPRINGFIELD ARMORY |
| 11014618 | 19200 | US ARMY ARDEC RDECOM |
Technical Data | NSN 3040-00-755-4898
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 4 PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 303SE,COND B MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 250.0 MICROINCHES |
| FIRST END DISTANCE FROM END TO FLAT | 0.250 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1238 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| FIRST END GROOVED FLAT LENGTH | 0.2500 INCHES MINIMUM AND 0.2700 INCHES MAXIMUM |
| FIRST END GROOVED FLAT DEPTH | 0.021 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 3 PLAIN |
| SECOND END DIAMETER | 0.1120 INCHES NOMINAL |
| SECOND END WIDTH ACROSS FLATS | 0.077 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| SECOND END STEP LENGTH | 0.100 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 0.1238 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| OVERALL LENGTH | 3.980 INCHES MINIMUM AND 4.000 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | SECOND STEP THD,NO. 4(.112)-40 UNC-2A,LOCATED 0.530 IN. LG. FROM SECOND END,SPLINE 0.430 IN. LG |