Part Details | SHOULDERED SHAFT
3040-00-760-4755 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: BL90280, BL90280, 7604755, 7604755, 7604755, 3040-00-760-4755, 00-760-4755, 3040007604755, 007604755
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-760-4755 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-760-4755
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BL90280 | 70408 | AT AND T CORP |
| BL90280 | 01714 | LUCENT TECHNOLOGIES INCADVANCED TECHNOLOGY SYSTEMS |
| 7604755 | 18876 | U S ARMY AVIATION AND MISSILECOMMAND |
| 7604755 | 19200 | US ARMY ARDEC RDECOM |
| 7604755 | 06983 | ZAGORA GEAR PRODUCTS INC |
Technical Data | NSN 3040-00-760-4755
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-11695 MIL SPEC SINGLE MATERIAL RESPONSE |
| FIRST END DIAMETER | 0.2486 INCHES MINIMUM AND 0.2496 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0170 INCHES MINIMUM AND 0.0270 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.2205 INCHES MINIMUM AND 0.2235 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.112 INCHES NOMINAL |
| SECOND END DIAMETER | 0.2357 INCHES MINIMUM AND 0.2361 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 1.875 INCHES NOMINAL |
| OVERALL LENGTH | 2.922 INCHES NOMINAL |
| STEP QUANTITY | 8 |
| SPECIAL FEATURES | FIRST END HAS FOUR THREADED HOLES DRILLED AXIALLY |