Part Details | SHOULDERED SHAFT
3040-00-772-5174 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 430063, 3040-00-772-5174, 00-772-5174, 3040007725174, 007725174
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-772-5174 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
CIRCULAR GROOVED
PLAIN
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-772-5174
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 430063 | 82577 | RAYTHEON COMPANYDBA RAYTHEON |
Technical Data | NSN 3040-00-772-5174
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720,COND B MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 0.1247 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | CIRCULAR GROOVED |
| SECOND END GROOVE WIDTH | 0.0120 INCHES MINIMUM AND 0.0140 INCHES MAXIMUM |
| SECOND END GROOVE DIAMETER | 0.1155 INCHES MINIMUM AND 0.1185 INCHES MAXIMUM |
| SECOND END DISTANCE FROM END TO GROOVE | 0.0310 INCHES NOMINAL |
| SECOND END DIAMETER | 0.1241 INCHES MINIMUM AND 0.1246 INCHES MAXIMUM |
| LARGEST STEP DIAMETER | 0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| OVERALL LENGTH | 0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | END HOLE DRILLED INTO 1ST END 0.063 IN.DIA BY 0.080 IN.DP |