Part Details | SHOULDERED SHAFT
3040-00-776-0431 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: AP312201016, AP31220-1016, 312201016, 31220-1016, 312201016, 31220-1016, 3040-00-776-0431, 00-776-0431, 3040007760431, 007760431
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-776-0431 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-776-0431
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AP31220-1016 | 32970 | AIRCRAFT PARTS CORPORATION |
| 31220-1016 | 31435 | LUCAS AEROSPACE POWER EQUIPMENTCORPORATION |
| 31220-1016 | 3CPE0 | SAFRAN POWER USA, LLC |
Technical Data | NSN 3040-00-776-0431
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | STEEL |
| FIRST END DIAMETER | 0.5190 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.140 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 0.4580 INCHES NOMINAL |
| FIRST END SPLINE MAJOR DIAMETER | 0.5190 INCHES MINIMUM AND 0.5200 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 6 |
| END SIMILARITY | NOT IDENTICAL |
| OVERALL LENGTH | 4.108 INCHES MINIMUM AND 4.153 INCHES MAXIMUM |
| SPECIAL FEATURES | EIGHT SPLINES SECOND END 0.020 IN. TAPER; 0.745 IN. OD; 0.480 IN. LG SPLINES |