Part Details | SHOULDERED SHAFT
3040-00-777-6757 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10885541, 10885541, 3040-00-777-6757, 00-777-6757, 3040007776757, 007776757
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-777-6757 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-777-6757
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10885541 | 22852 | SPALLA INC |
| 10885541 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-777-6757
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | 8$DST0146 |
| MATERIAL DOCUMENT AND CLASSIFICATION | GASTM A304$GASTM A331$JDGMIL-S-46172 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 0.7641 INCHES MINIMUM AND 0.7651 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 2.700 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.8760 INCHES MINIMUM AND 0.8860 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.9990 INCHES MINIMUM AND 1.0000 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.9500 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 19 |
| LARGEST STEP DIAMETER | 1.685 INCHES MINIMUM AND 1.686 INCHES MAXIMUM |
| OVERALL LENGTH | 13.450 INCHES NOMINAL |
| STEP QUANTITY | 7 |
| SPECIAL FEATURES | SECOND END INT THD,0.940 IN. LG |