Part Details | SHOULDERED SHAFT
3040-00-787-4273 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2040401305, 204-040-130-5, 204040130005, 204-040-130-005, 3040-00-787-4273, 00-787-4273, 3040007874273, 007874273
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1962 | 00-787-4273 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
INTERNAL THREADED
PLAIN
INTERNAL THREADED
Cross Reference | NSN 3040-00-787-4273
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 204-040-130-5 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| 204-040-130-005 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
Technical Data | NSN 3040-00-787-4273
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | INTERNAL THREADED |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END DIAMETER | 1.8750 INCHES NOMINAL |
| FIRST END INTERNAL THREAD LENGTH | 0.440 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | PLAIN |
| SECOND END DIAMETER | 1.3755 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.875 INCHES NOMINAL |
| OVERALL LENGTH | 1.875 INCHES NOMINAL |
| STEP QUANTITY | 2 |
| SPECIAL FEATURES | INTERNAL WRENCHING HOLE ON FLANGED END 0.760 IN. SQUARE W/FOUR EQUALLY SPACED HOLES 0.072 IN. DIA DRILLED THRU CORNERS 0.060 IN. FROM RIGHT END |
| END ITEM IDENTIFICATION | TH-1H SUPT HELICOPTER |