Part Details | SHOULDERED SHAFT
3040-00-790-5744 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: AS77723P5, 77723P5, 77723P5, 3040-00-790-5744, 00-790-5744, 3040007905744, 007905744
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1960 | 00-790-5744 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-790-5744
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AS77723P5 | 12776 | AIRCRAFT SUPPLIES |
| 77723P5 | 00198 | PRATT & WHITNEY CANADA CIE DIVPRATT& WHITNEY CANADA CORP. |
| 77723P5 | 77445 | UNITED TECHNOLOGIES CORPORATIONDBA PRATT WHITNEY-SPARE PARTS |
Technical Data | NSN 3040-00-790-5744
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 8.0 MICROINCHES |
| FIRST END DIAMETER | 0.5200 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.6923 INCHES MINIMUM AND 0.6925 INCHES MAXIMUM |
| OVERALL LENGTH | 2.958 INCHES MINIMUM AND 2.968 INCHES MAXIMUM |
| STEP QUANTITY | 4 |
| FSC APPLICATION DATA | ACFT ENG,RECIPROCATING |