Part Details | SHOULDERED SHAFT
3040-00-795-5141 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 3544583, 3-54458-3, 3544583, 3-54458-3, 3040-00-795-5141, 00-795-5141, 3040007955141, 007955141
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-795-5141 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
FLAT KEYWAY
Cross Reference | NSN 3040-00-795-5141
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 3-54458-3 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN AEROSPACE |
| 3-54458-3 | 0JRC1 | NORTHROP GRUMMAN TECHNICAL SERVICES,INC. |
Technical Data | NSN 3040-00-795-5141
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 0 FLAT KEYWAY |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 125.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0620 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.1420 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.2630 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1950 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 0.2630 INCHES NOMINAL |
| END SIMILARITY | IDENTICAL |
| LARGEST STEP DIAMETER | 0.2490 INCHES NOMINAL |
| OVERALL LENGTH | 1.2500 INCHES NOMINAL |
| STEP QUANTITY | 4 |
| SPECIAL FEATURES | OPTIONAL CENTER DRILL BOTH ENDS |
| END ITEM IDENTIFICATION | T-38 AIRCRAFT |